FAQs | Site Map | Search | English | Nederlands

Blue Flame PT4000 Micro Pencil Torch - Operating Instructions

Parts Identification

  • Familiarize yourself with the parts of your PT4000 Micro Pencil Torch before operating it.
  • It should be handled by literate adults, or under constant adult supervision.
  • It is essential that the following operating procedures be read and understood before attempting to light or use the Blue Flame PT4000 Micro Pencil Torch.
  • These procedures must be carefully observed in order to promote safe usage.

Igniting and Shutting-Off your Blue Flame PT4000 Micro Pencil Torch

  • Slide On/Off button forward into On position and the butane gas will start to flow.
  • Push the ignition ball at the bottom of the torch and the gas will be ignited electronically with a snapping sound.
  • For shut-off, slide the On/Off button back into the Off Position close it securely.

Thermal Power and Flame Control of your Blue Flame PT4000 Micro Pencil Torch

  • Adjust the thermal power level and the lenght of the flame to suit usage objectives.
  • The highest temperature attainable will be about 1,300 degrees Celsius.
  • Use the Flame Regulator to regulate the flame.
  • After ignition, do not leave the PT4000 Micro Pencil burning longer than 30 minutes continously.

Refilling your Blue Flame PT4000 Micro Pencil Torch

  • For detailed instruction, refer to our Refilling Section.

Safety and Handling Precautions regarding the Blue Flame PT4000 Pencil Micro Torch

  • For a detailed overview of safety, storage and handling instructions, please refer to our Safety & Storage Section.





Copyright 2001-2002, Blazer Europe BV. All rights reserved.
WWW.MICROTORCHES.COM