FAQs | Site Map | Search | English | Nederlands

Blue Flame ES1500 Piezo Micro Torch - Operating Instructions

Parts Identification

  • Familiarize yourself with the parts of your ES1500 Micro Torch before operating it.
  • It should be handled by literate adults, or under constant adult supervision.
  • It is essential that the following operating procedures be read and understood before attempting to light or use the Blue Flame ES1500 Micro Torch.
  • These procedures must be carefully observed in order to promote safe usage.

Igniting and Shutting-Off your Blue Flame ES1500 Micro Torch

  • Push the ignition lever downward and the gas will be ignited electronically with a snapping sound.
  • Lock the flame with the flame lock knob.
  • For shut-off, release the flame lock knob.

Thermal Power and Flame Control of your Blue Flame ES1500 Micro Torch

  • Adjust the thermal power level and the lenght of the flame to suit usage objectives.
  • The highest temperature attainable will be about 1,300 degrees Celsius.
  • Both the gas control knob and the air control knob can be used to regulate the flame.
  • After ignition, turn the air control knob either to the right or left for necessary thermal power adjustments. Closing the air inlet well produce a low temperature yellow flame, while fully opened the micro torch produces a sharp, high temperature blue flame.
  • After ignition, do not leave the ES1500 Micro Torch burning longer than 30 minutes continously.

Refilling your Blue Flame ES1500 Micro Torch

  • For detailed instruction, refer to our Refilling Section.

Safety and Handling Precautions regarding the Blue Flame ES1500 Micro Torch

  • For a detailed overview of safety, storage and handling instructions, please refer to our Safety & Storage Section.





Copyright 2001-2002, Blazer Europe BV. All rights reserved.
WWW.MICROTORCHES.COM